SCE

STARFIRE™ 6000 UPDATE

Issue link: http://south88.uberflip.com/i/1420808

Contents of this Issue

Navigation

Page 0 of 4

Reprogramming Methods There are three methods for reprogramming StarFire™ 6000 receivers and two methods for StarFire™ 6000 Integrated receivers. The instructions below outline how to use each method. Over the Air This method can be used with StarFire™ 6000 Universal and StarFire™ 6000 Integrated Receivers. 1. If you are using a Generation 4 display with an active Wi -Fi® connection or a Modular Telematics Gateway (MTG) connected to an active Wi-Fi® connection or good cellular coverage, the StarFire™ 6000 receiver can be updated using Over the Air updates. NOTE: An active JDLink™ subscription is required to use the MTG cellular connection. 2. Check for updates online > for other devices and review available updates 3. Select GPS Receiver. Click install. An active connection is required during this step. Download time is dependent on internet connection. 4. Once the update is downloaded, reprogramming will typically take 30 minutes for StarFire™ 6000 Universal and StarFire™ 6000 Integrated Receivers. 5. Select "Software Manager". 6. Select "Check for Updates online". 7. Select "View Updates for Other Devices". 8. Select "GPS Receiver". 9. Select correct file for programming and download. Download time is dependent on internet connection. 10. StarFire™ 6000 Universal Receivers will typically take 30 minutes to complete the software update over CAN. StarFire™ 6000 Integrated Receivers will typically take 3-5 minutes over Ethernet. 11. Keep the key switch in the ON or ACCESSORY position during reprogramming. StarFire™ 6000 & StarFire™ 6000 Integrated Software Reprogramming

Articles in this issue

view archives of SCE - STARFIRE™ 6000 UPDATE